Continuous Casting Line Gears
One of the most challenging things about implementing drives on continuous casting lines is that they are close to a strand of steel at temperatures up to 450°C. The high temperatures at the gear output shaft, dust and heavy vibrations, the huge volumes of cooling water from the secondary cooling for the steel strand, present extreme challenges that need to be solved in the tightest spaces on continuous casting lines.
Eisenbeiss pinch stand gears are ideally equipped for these extreme operating conditions thanks to their integrated cooling and special seals. Lubrication pumps have been developed that work without an external power supply and ensure that the gear system is lubricated reliably even in the case of extreme temperature differences. This ensures that the gears operate even in the toughest conditions.
In view of the very limited space available on continuous casting lines, the driver units are built with very compact dimensions. Eisenbeiss gearboxes use bevel gears, which enable the motors to be aligned at an angle of 90° in relation to the strip driver rollers. As a result, the motors can be flexibly oriented either vertically or horizontally.

Technical Data
Advantages
Applications
One of the most challenging things about implementing drives on continuous casting lines is that they are close to a strand of steel at temperatures up to 450°C. The high temperatures at the gear output shaft, dust and heavy vibrations, the huge volumes of cooling water from the secondary cooling for the steel strand, present extreme challenges that need to be solved in the tightest spaces on continuous casting lines.
Eisenbeiss pinch stand gears are ideally equipped for these extreme operating conditions thanks to their integrated cooling and special seals. Lubrication pumps have been developed that work without an external power supply and ensure that the gear system is lubricated reliably even in the case of extreme temperature differences. This ensures that the gears operate even in the toughest conditions.
In view of the very limited space available on continuous casting lines, the driver units are built with very compact dimensions. Eisenbeiss gearboxes use bevel gears, which enable the motors to be aligned at an angle of 90° in relation to the strip driver rollers. As a result, the motors can be flexibly oriented either vertically or horizontally.
Technical Data
Technical
Data

GEAR TYPE | shaft-mounted helical bevel gear |
---|---|
POWER | 5 kW to 50 kW |
OUTPUT SPEED | 2 to 15 rpm |
RATIO | 100 to 750 |
LUBRICATION / COOLING | Lubricated by integrated wedge pump / cooled via water-cooled housing or internal cooling circuit |
Advantages
Compact design
Can be used flexibly in various positions on left or right.
Optimized lubrication system
A special solution for drive shaft lubrication replaces the usual grease lubrication on vertical arrangements and significantly reduces maintenance costs.
Tightness and durability
Temperature-resistant sealing materials ensure a long service life and make it easy to replace the seals.
Efficient cooling
Different cooling concepts, such as direct cooling of the housing or the integrated cooling circuit, ensure reliable heat dissipation.
Applications
